Owner's Manual

Chapter 2 Standard Features 23
Compass Calibration
The compass has been factory calibrated. Periodic user
calibrations help the compass function in the environment
the Mesa 3 is being used in.
1. Open an app that uses the compass.
2. Move the Mesa 3 around in the air so that it is oriented
in different directions and angles. An effective way to
assure this is properly done is to move the Mesa 3 back
and forth in a sideways gure 8 for approximately 30
seconds.
Bluetooth
®
Wireless Communication
The Mesa 3 has built-in Bluetooth
®
wireless technology,
allowing you to connect it to other wireless devices with
Bluetooth technology.
Creating a Partnership/Pairing a Bluetooth Device
To create a partnership between the Mesa 3 and another
device with Bluetooth technology:
1. Turn both devices on.
2. Place them within a few feet of each other. (The Mesa
has long range Bluetooth, but the other device might
not.)
3. Make Bluetooth discoverable on both devices. Bluetooth
on the Mesa 3 is off by default. To activate it, open the
Action Center and press and hold the Bluetooth icon.
Select Go to settings.
4. In the Bluetooth settings screen, you should see a list of
all Bluetooth devices within range. Tap on the name of
the device in the list you would like to pair with, then
tap Pair. If prompted, enter the PIN or pass code of
the paired device. You should now be paired with the
device.