Owner's Manual

Chapter 2 Standard Features 11
water and dust. The Windows
®
10 operating system
enhances the ability of the Mesa 3 to recognize touch
gestures, making it easy to use a nger to make selections
and navigate. You can also use the ne tip capacitive stylus
included with the Mesa 3 or optimize it for wet conditions
(see Touchscreen Prole Settings in the next section).
Display and Touchscreen Prole Settings
Display Settings
To adjust the display settings including the text size,
brightness, and orientation, go to the Action Center and
select All settings > System > Display.
Backlight Brightness
There are a few shortcuts to adjust the display backlight
brightness.
Open the Action Center. Tap the percent tile (sun icon) to
toggle the display backlight brightness up or down in 25%
increments from 0% to 100%. This same tile can be accessed
by tapping the battery icon on the desktop. To simply dim
the backlight, tap the Battery saver tile. Tap it again to
return it to the previous brightness.
Display Magnier
To turn the magnier on, go to the Action Center and select
All settings > Ease of Use > Magnier. Turn the magnier on
and adjust other settings as desired. Once the magnier is
turned on, you can use the + and – symbols on the display
to zoom in and out.
If you use this feature frequently, you can set up a
programmable key to zoom in and out on the display. See
Keyboard Features, Programmable Keys later in this chapter
for more information.
Touchscreen Prole Settings
To adjust the touchscreen prole, go to the Start menu
and select Touchscreen Proles (located at the bottom of
the Start menu screen in a tile). Select the prole you want
the screen optimized for: nger and stylus (default), nger,
stylus, glove or wet conditions. As the new prole loads, a