User Manual

26 Mesa 2 Rugged Tablet Owner’s Manual
1. Billing Information and business ID, such as your Federal
Tax I.D. or VAT number.
2. The wireless services required. Specify that you need
data service only. You do not need voice or messaging
services.
3. You may be asked for the modem’s IMEI number. From
the Start menu, select Settings > Network & Internet >
Cellular. Tap on the Cellular icon, then select Advanced
Options. The IMIE number is listed under Properties.
Install the SIM Card
The card slot and exible card holder are designed to
hold the card securely in place so it will not come out or
disconnect if the tablet is dropped. To insert or remove a
card follow these step:
1. Power off the tablet (this is a requirement).
2. Remove the battery door as outlined in chapter 1.
CAUTION: The Mesa 2 is not sealed against water and
dust when the battery door is not installed properly.
3. Remove the battery pack by pulling up on the black tab
on the front of the battery pack.
4. An image on the battery compartment label shows the
correct location and orientation for the SIM card (slot on
the right). Pull the exible card holder back out of the
way. Push the card into the slot to insert it.
!