User Manual

22 Mesa 2 Rugged Tablet Owner’s Manual
Creating a Partnership/Pairing a Bluetooth Device
To create a partnership between the Mesa 2 and another
device with Bluetooth technology:
1. Turn both devices on.
2. Place them within a few feet of each other. (The Mesa
has long range Bluetooth, but the other device might
not.)
3. Make Bluetooth discoverable on both devices. Bluetooth
on the Mesa 2 is off by default. To activate it, open the
Action Center and press and hold the Bluetooth icon.
Select Go to settings.
4. In the Bluetooth settings screen you should see a list of
all Bluetooth devices within range. Tap on the name of
the device in the list you would like to pair with, then tap
Pair. If prompted enter the Pin or Passcode of the paired
device. You should now be paired with the device.
Note: If Bluetooth is on and the tablet enters sleep or
hibernate mode, Bluetooth turns off to save battery power.
The connection is resumed once it powers back on.
Wi-Fi Wireless Networking
The Mesa 2 has built-in Wi-Fi wireless networking to connect
to the Internet or an ofce network.
Connecting to a Wi-Fi Network
To use Wi-Fi, you need to be in range of a Wi-Fi access
point to make a connection. When Wi-Fi is turned on (the
default), the Mesa 2 automatically starts scanning the area
for available Wi-Fi networks.
From the Action Center click and hold the Wi-Fi network
icon, then select go to settings. A list of available networks
is shown. Select the network you want to use and enter
the network security key. The Mesa 2 remembers the Wi-Fi
network connections created.
Wi-Fi can be turned off and on and settings can be
managed from this set up screen.