owner’s manual
Mesa Mobile Dock The Mesa Mobile Dock is an optional accessory that provides a mounting station for the Mesa Rugged Notepad and additional communication options. Note: The Mesa Mobile Dock is not functional as a stand alone device. It requires the Mesa to be functional. For example, it is not a stand alone powered USB hub. Communication Options The mobile dock provides additional communication ports for use with sensors and other external devices, supplementing the ports on the Mesa.
Bottom view of mobile dock showing the ports: 1 2 3 4 1 12V DC power input jack 2 USB client 3 RS-232 serial ports 4 USB host ports 1. Power input jack, 12VDC for power input and battery charging: This jack is used to power the mobile dock and the Mesa. The power port on the Mesa is not accessible when it is in the mobile dock. The following accessories can be used to provide power and charge the Mesa batteries: a. Wall charger provided with the Mesa b.
Mesa is still accessible when it is in the mobile dock, providing three ports total. Note: The dock serial ports do not have 5V power available on their DTR or RI pins for powering devices. 4. USB host ports: The mobile dock provides two additional USB host ports. The USB host port on the Mesa is still accessible when it is in the mobile dock, providing three ports total. Note: If 500mA is drawn from each port (1.5A total), the batteries may take longer to charge than normal. 5.
right. Place screws into the holes and screw them in half-way. 2. Slide the desktop base up so the screw slots on the back slide onto the screws and tighten them. 3. On the front of the desktop base near the top and the front of the dock near the bottom are two small screw holes, one on the left and one on the right. Align the holes, place screws into the holes, screw them in all the way, and tighten them. The desktop base is now ready to use.
Mesa Dock Vehicle Mount The vehicle mount (optional mobile dock accessory) allows the mobile dock to be used in a vehicle or in another mobile mounting application. Two RAM Mount bases with 1.5” balls, a double socket arm, four screws, and four 8-32 nuts are included. Note: Additional attachments are available for the vehicle mount from National Products Inc. at www.ram-mount.com. Installing the vehicle mount: 1. From the front of the dock you see four hex holes. Press a nut into each hole.
3. Insert the four screws into these holes, screw them in all the way, and tighten them. 4. Attach the double socket arm to the balls on the two RAM Mount bases (one on each end). Tighten the arm around the balls as needed by turning the knob in the center of the arm. The mobile dock is now ready to use in a vehicle, on a pole, etc.
Vehicle power considerations: When powering the dock from a vehicle, especially in a permanent situation, be familiar with the power setup. Power configuration options and recommendations: The Mesa suspends when battery power is being used (default setting), insuring that the both the Mesa batteries and the vehicle battery are not fully depleted. In this configuration, the Mesa is powered and charging its batteries whenever vehicle power is applied.
Wall Mount You can mount the mobile dock to a wall. Use 2 size 8 wood screws and attach the dock to a wall stud or plywood panel. Attaching the Mesa to the Mobile Dock Follow these instructions to place the Mesa into the mobile dock: 1. Attach the connector protector to the Mesa and close the individual port covers so the Mesa docks properly. If the hand strap is in the way, remove or move it. 2. Hold the Mesa so the connector protector is at the bottom.
3. Press the Mesa back to secure it to Mobile Dock. The top latch snaps into place. Note: Tighten the security bolt when the mobile dock is used in a vehicle. Releasing the Mesa from the Mobile Dock To release the Mesa from the mobile dock, lift up on the top latch. Pull the Mesa forward and remove it. Note: Loosen the security bolt if the mobile dock is being used in a vehicle.
Maintenance Environmental Issues The mobile dock sheds water when used in its normal configuration, but is not sealed against water. Avoid using the dock in situations where water can enter the connector ports. Do not touch the docking pins (spring loaded contacts) with conductive items when power is plugged into the dock. Do not drop items on the dock that can damage the pins. Keep debris off of the docking pins and the connectors to maintain the best performance.
! Battery Warnings WARNING! These warnings are for lithium ion rechargeable batteries. To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or expose to fire. Do not disassemble or open, crush, bend or deform, puncture or shred. Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion or other hazard.
Avoid dropping the battery. If the battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection. Improper battery use may result in a fire, explosion or other hazard. ! Wall Charger Warnings WARNING! To reduce the risk of personal injury, electrical shock, fire or damage to the equipment: Plug the wall charger into an electrical outlet that is easily accessible at all times.
Regulatory Information United States (FCC) This device complies with Part 15 of the FCC Rules. Operation of this equipment is subject to the following two conditions: 1. The device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
this product employ special provisions to avoid radio interference and should not be altered or substituted. ! CAUTION: Changes or modifications to the Mesa that are not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Industry Canada This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. This device complies with RSS-210 of Industry Canada.
P/N 22507-01 Copyright 12-2010 Juniper Systems, Inc.
