Owner's manual

LandMark Mobile User’s Manual 7
Features
Connects with a wide variety of GPS receivers using the
NMEA data streams.
Multiple data interfaces to other programs running
concurrently. Shared memory, data exchange le, and wedging
your GPS data into other programs using a Hot Key are options
for data interface.
Sky plot and satellite signal strength bars keep you informed
of GPS status and quality.
Navigation screen allows you to select To and From waypoints.
Features include: a compass ring depicting direction of travel;
an arrow designating direction to destination; and data elds
showing distance to go, speed, track, and bearing along with
cross-track error.
Multiple user selectable waypoint les, 256 waypoints per le.
The number of waypoint les are only limited by the available
data storage on the eld computer.
Marking waypoint feature provides the option to average a
user specied number of x readings.
Hot key, user specied, for triggering a Mark at any point in
time; this key remains hot regardless of which application is
active.
Seable serial interface parameters, supporting GPS receiver
input through any of the hardware COM ports, including
Bluetooth.
User selectable datums and display units (statute, metric,
standard (U.S. feet), nautical).
Diagnostics dialogue screen that displays received NMEA data
strings, which are helpful when connecting a GPS receiver.
Toggle Icon connects / disconnects any Field PC Com Port.
Bluetooth Com Port usage auto detection, loads Bluetooth
receiver by default if set as a “favorite.”
Bluetooth auto reconnect, LandMark Mobile automatically trys
to reconnect up to three times when a Bluetooth connection is
lost.












