Owner's manual

62 LandMark Mobile User’s Manual
Error Message:
Unable to open data exchange file.
This message appears for one of the following reasons:
1. LandMark Mobile cannot open or create the data exchange
le because the disk is full.
2. A third party program has the data exchange le open.
Fix the problem by either deleting les o of the disk, or wait for
the third party program to close the data exchange le.
Error message:
Maximum number of waypoints per file has been reached. EXPORT
button still available for data export.
Waypoint les have a maximum of 256 waypoints per le. This
message appears for the following reason:
1. The maximum number of waypoints has been reached.
The Export buon can still be used to export data to another
application, but a new waypoint le must be created if extra
points are stored.
LandMark Mobile Waypoint Screen Error Messages
The following are the error messages and suggested x for those
messages that may occur when using the LandMark Mobile
Waypoint screen.
Error message:
Waypoint name can be 30 characters or less. Characters after 30 will
be truncated.
This message appears for the following reason:
1. The alloed number of characters (30) for a waypoint name
has been used.
Fix the problem by making the waypoint name shorter.
Error message:
Maximum number of waypoints per file has been reached. Either create
a new waypoint file or delete unused waypoints from the current file.
Every waypoint le has a maximum number of points (256) that can
be entered. This error message appears for the following reason:
1. The maximum number of waypoints per le has been reached.
Fix the problem by creating a new waypoint le or by deleting
unused points from the current le.