Owner's manual

LandMark Mobile User’s Manual 61
Error message:
Failed to open waypoint file and create the converted file.
This error message appears for the following reason:
1. A waypoint le conversion fails at the beginning of the
process because the waypoint le could not be accessed.
Fix the error by doing either a reset or by deleting old les to free
up disk space.
Error message:
Failed to create the converted file.
This message pops-up when trying to either create a new
converted le or write data to a newly converted le. This
message appears for one of the following reasons:
1. The disk is full.
2. The le is already open in another application.
To x the error, delete some les o of the storage disk or close
the le being used by the other running application.
Error message:
Could not create shared memory. Method stopped.
The error message appears for the following reason:
1. An error reserving shared memory has occurred.
To x the error do a reset and restart LandMark Mobile.
LandMark Mobile Mark Point Screen Error Messages
The following are the error messages and suggested x for those
messages that may occur when using the LandMark Mobile Mark
Point screen.
Error message:
Waypoint name can be 30 characters or less. Characters after 30 will
be truncated.
When naming a point, this message appears for the following
reason:
1. The waypoint name is too long and needs to be shortened.
To x the problem, shorten the point name to less than 30
characters.