Owner's manual

LandMark Mobile User’s Manual 59
the key-value pair is not functioning correctly, LandMark Mobile
cannot read the application path value. This problem could
happen because of one of the following reasons:
1. A clean boot was executed and erased the key-value.
2. The registry has been corrupted.
Registry errors may be xed by doing a reset. If the reset does not
work, reinstall LandMark Mobile.
LandMark Mobile General Error Messages
The following are the error or warning messages and the
suggested x for those messages that may occur during general
LandMark Mobile use.
Error message:
Error Reading Waypoint file.
A waypoint le is saved as a text le (.txt), so a user can open it in
Word or Notepad, etc. and modify it. To do this, the data must be
properly formaed. This error message pops up for the following
reason:
1. The waypoint le is not formaed properly.
To x this problem use the Convert Waypoint File menu option in
Menu/Tools/Convert Waypoint. It formats your data to the proper
usable format.
Error message:
Error Creating Waypoint file.
This error message is used to protect any les you may have
saved. It ensures that your les are not overwrien. This message
appears for one of the following reasons:
1. You are trying to duplicate a le name.
2. The path specied to save to or to open from is not valid.
To x this problem, rename a le, or be sure that the path you
have specied exists.
Error message:
Directory does not exit. Using “\My Documents\.
When LandMark Mobile is closed, the current waypoint le is