Owner's manual

LandMark Mobile User’s Manual 53
Store WPT
The Store WPT (Store Waypoint) buon is used to store an average
waypoint in the current waypoint le. If the Store WPT buon
is pressed before the Average buon (if the buon is available),
the averaging process begins automatically and continues until
all points for the average have been obtained. Aer the point is
averaged, it is stored in the waypoint le.
In both cases, aer the averaged waypoint is stored, the Mark
Point screen closes. The new waypoint is included in the list of
waypoints on the le side of the Waypoint screen.
Export
The Export buon starts the average function, and then exports
the averaged point to your Waypoint Data Path (See Conguration/
File to set up Waypoint Data Path).
Note: When the waypoints le reaches the 256 point limit, the Export
buon can still be used to export data to another application, but a new
waypoint le must be created if additional points are stored.
Cancel
Tapping the Cancel buon closes the Mark Point screen.