Owner's manual

LandMark Mobile User’s Manual 35
The Conguration screen contains seven tabs, GPS, File, Data,
Units, Mask, HotKeys, and Keyboard. This section covers the
options available in each one of these tabs.
To use the Conguration screen via the keyboard, use the tab keys
(forward or back tab), or the circular navigation key. To exit the
Conguration screen, tap OK in the top right hand corner of the
screen, which will also automatically save all your conguration
changes.
Note: Tapping on the OK in the upper right hand corner saves any
conguration changes you have made.
GPS Tab
The GPS tab is used to congure the COM port you are using to
aach the GPS receiver. Any changes to the communication port
become eective immediately, a program restart is not needed.