Owner's manual
LandMark Mobile User’s Manual 31
Used
Used is the status of the satellite’s signal in calculating the current
location. If the satellite signal is picked up by the receiver, but the
signal is not strong enough, or if the satellite is not benecial to
use due to poor geometric arrangement, it is not used for position
calculation. Yes indicates that the satellite’s data is being used to
calculate your position. No indicates that the satellite’s data is not
being used to calculate your position.
Freeze/Unfreeze
The buon title automatically toggles between Freeze and Unfreeze
depending on your selection. The buon title displays the action
that occurs when the buon is tapped. The Freeze buon captures
the Packet Info (data stream) instantaneously from the GPS receiver.
Tap Unfreeze to return to the continuous data stream mode.
Navigation Screen (NAV)
The Nav screen allows users to collect point information, calculate
point dierences, check survey lines, and specify a path of travel.
To display the Nav Screen, complete one of the following steps:
Tap on the Nav icon located in the task bar.
Select | Menu | Screens | NAV.
The Navigation screen is shown below: