Instruction Manual
66 Juniper Aspect Owner’s Manual
Settings
GPS
Select the Settings function on the Juniper Aspect home
screen to congure the GPS. From the Settings screen,
select GPS. The following screen is shown:
Tap the current setting to see a list of settings to select
from. Tap the down arrow ▼ to select a setting.
Port Name: The port name for your GPS receiver can
vary based on the model of mobile computer, the
GPS receiver and how the GPS receiver and mobile
computer have been congured.
Baud Rate: The baud rate is normally set in your
receiver. Typical setting:
Port Name Baud Rate
Mesa, integrated GPS COM2 38,400
Tap Save when are done. The Settings screen is shown.