User Manual
4 Bar Code Expansion Pod
Getting Started
Before you begin using your Bar Code Expansion Pod
to scan bar codes, open the Bar Code Reader program
and set up the scanner’s functions. To open the Bar Code
Reader program, complete the following steps:
1. Turn on your Field PC.
2. Go to Start > Programs > Bar Code Reader.
An Initializing Bar Code Scanner message box pops
up, as the Bar Code Reader program loads and the Bar
Code Reader program opens.
3. Tap on the Bar Code Setup buon.
Bar Code Setup
Before you begin scanning, use the Bar Code Setup
program to congure the bar code scanner according to
your needs. The Bar Code Setup options are described