Reference Guide User guide

Resetting the device

Some programs require you to reset your device when you

install them. Follow the steps below to reset the Field PC:

1. Back up your  les and close any open applications. (For

instructions on backing up  les, see Backing up data in

this chapter.)

2. Press the power button until the power button menu

appears.

3. Choose

Reset.

Note:

If your device locks up, you can reset the device by pressing

the power button for 10 seconds or until the screen goes dark.

The device resets itself automatically after a few seconds.

Exploring ﬁ les

To explore  les stored on the Field PC, follow these steps:

Tap Start > Programs > File Explorer. The File Explore

window appears.

2. If the drive you want does not

already appear, tap on the

drop-down menu arrow to

select it, as shown here.

3. Navigate the  le directory by

tapping on the folders and

 les you want. If you want to

go up a level, tap on the Up

soft key at the bottom of the

screen.

4. Use the Menu soft key at

the bottom of the screen

to manipulate  les.