Reference Guide User guide

Chapter 5: Performing Common Tasks on the Field PC

charge LED disappears. However, the device continues to

charge.

Powering off the Field PC

Powering o the device ends all programs and removes

power from all system components except for the real-time

clock.

Powering o your device saves power without draining

the battery.

We recommend powering o the mobile device if it will be

inactive for more than one week.

To power o the Field PC, follow these steps:

1. Save and close all applications. (For instructions on

backing up your  les, see the section in this chapter

called Backing up data.)

2. Press the Power button until the

Power Button

menu appears, as shown here.

3. Tap

Power O , then OK.

Note: The keyboard backlight stays on

for a few seconds after the device shuts

o . Until the keyboard backlight turns

o , the device cannot be powered on

again.

To power on the device, hold the power button until the

green noti cation LED appears. The device is now booting.

This process takes about a minute.