Reference Guide User guide

Powering o the Field PC. Powering o the device ends all

programs and removes power from all system components

except for the real-time clock. Unlike suspend mode, the

device resets when it is powered on again.

To preserve battery power, we recommend you power o the

device if it will be left unused for two weeks or longer.

To power o the Field PC,

1. Save your open  les and close any running programs.

(For instructions on backing up  les, see Backing up data

in Chapter 5.)

2. Press the Power button until the Power Button menu

appears, as shown here.

Note: The device cannot be powered o while it is plugged

into the wall charger.

3. Tap Power O . A warning dialog appears, as shown in the

second picture. Tap OK.

Note: The keyboard backlight

stays on for a few seconds after

the device shuts o . The device

cannot be powered back on until

the keyboard backlight turns o .

To power on your Field PC, hold down the Power button until

you see the green noti cation light appear.

Resetting the device. Some programs require you to reset

your device during the installation process. Follow the steps

below to reset the Field PC:

1. Save your open  les and close any running programs.

(For instructions on backing up  les, see Backing up data

in Chapter 5.)

2. Press the Power button until the Power Button

menu appears.

3. Choose Reset.

thth

tttt

ilil