Instruction Manual

8 Field PC AMXU GPS Expansion Pod
When you are nished, click the “OK” buon in the upper
right hand of the screen to conrm the seings.
Note: the External GPS control panel only support NMEA
messages from the GPS receiver.
For more information consult the Field PC Owner’s
Manual or Windows Mobile help les.
GPS Receiver Hardware Settings
Below are the default seings used to communicate with
the GPS receiver. If you are not using the GPS Manager
and your program needs to communicate directly with
the GPS receiver, you must put this information into your
GPS application.
 COM3
 38400 Baud
 No Parity
 8 data Bits
 Stop Bit
Note: The GPS receiver uses the DTR signal on COM3 to
control power. If your GPS program has a checkbox or seing
to enable the DTR function, enable it for proper operation of the
GPS Expansion pod.
Juniper Systems LandMark Mobile GPS Utility has a DTR
function option which must be checked.