Manual
Items Needed
• Desiccant pack with two pieces of Velcro aached (included)
• Small athead screwdriver
Installation Instructions
To install a desiccant pack in the Allegro, complete the following steps:
1. Using a small athead screwdriver (or coin), turn the screws on the
PC Card door ¼ turn to the le to unlock the latches.
2. Remove the adhesive backing from the piece of Velcro aached to
the Velcro that is aached to the desiccant pack.
3. Aach the desiccant pack with the aached Velcro pieces so it is
about ¼ inch below the upper gasket rim and centered between the
PC card door holder tabs. Make sure the lower edge of the desiccant
pack sits directly above the PC Card holder tabs.
Make sure the transparent window is facing out so the color indicator is
visible.
Velcro with adhesive to attach to Allegro
Velcro attached to desiccant pack