Owner's Manual

Chapter 2 Standard Features 17
from the device. Tap RESET TABLET at the bottom of the
screen to begin the process. This operation can take up to
an hour for some models. When the process is complete, all
changes that have been made by the user are removed.
Bluetooth
®
Wireless Communication
The Allegro 3 has built-in Bluetooth
®
wireless technology,
allowing you to connect it to other wireless devices with
Bluetooth technology. Minimum performance between
similar objects in an unobstructed environment is
approximately 100 feet (30 meters).
Creating a Partnership/Pairing a Bluetooth Device
To create a partnership between the Allegro 3 and another
device with Bluetooth technology, follow these steps:
1. Turn both devices on.
2. Place them within at least 100 feet (30 meters) of each
other.
3. Make Bluetooth discoverable on both devices. Bluetooth
on the Allegro 3 is off by default. To activate it, go to
Settings > Bluetooth. You can also pull down the Quick
Settings Tray and tap the Bluetooth symbol to turn it on.
Tap the word Bluetooth underneath the symbol. A list of
discoverable devices is shown. Tap MORE SETTINGS to
go to the settings screen.
4. In the Bluetooth settings screen, a list of all Bluetooth
devices within range is shown. Tap on the name of the
device in the list you would like to pair with. A Bluetooth
pairing request box is shown. If prompted, enter the PIN
or pass code of the device you want to pair with. You
should now be paired with the device.
Note: If Bluetooth is on and the Allegro 3 enters sleep mode,
Bluetooth turns off to save battery power. The connection is
resumed once it powers back on.