Owner's Manual

Chapter 2 Standard Features 13
Data Storage Options
Flash Data Storage
The Allegro 3 has 16 GB of internal ash data storage. Go
to Settings > Storage to see how much storage is available,
and how it is being used (storing Apps or Images, for
example).
SD Card Slot
Additional storage can be added with an SD/SDXC card.
The SD card slot is located in the battery compartment. To
insert or remove a card, follow these steps:
CAUTION: Always power off the handheld before removing
the battery. Failure to do so may cause loss of data or
damage to the handheld.
1. Power off the handheld by holding the power button
until the Power Button menu appears and selecting
Power Off. Ensure that your unit is not plugged in to
external power.
2. Loosen the screws to the battery compartment, and
remove the door. The hand strap remains attached.
CAUTION: The Allegro 3 is not sealed against water and
dust when the battery door is not installed properly.
3. Remove the battery pack.
4. An image on the battery compartment label shows the
correct location and orientation for the SD card (slot on
the right). Push the card into the slot to insert it.
5. Replace the battery pack, and attach the battery door.
6. Power up the handheld.
!
!
!