User's Manual
holes, one on the le and one on the right. Place screws into
these holes and screw them in half-way.
2. Slide the desktop base up so the screw slots on the back
slide onto the screws and tighten them.
3. In the front of the desktop base and on the dock near the
boom there are two screw holes, one on the le and one
on the right. Place screws into these holes, screw them in
all the way, and tighten them. The desktop base is now
ready to use.
Mobile Dock Vehicle Kit
The vehicle kit (optional mobile dock accessory) allows the
mobile dock to be used in a vehicle or in another mobile
mounting application. The kit includes two RAM mount bases,
a RAM mount arm, four screws, and four 8-32 nuts.
Note: Additional aachments are available for the vehicle kit from
National Products Inc. at www.ram-mount.com.
98 Mesa Rugged Notepad Owner’s Manual