User's Manual
Powering O and Powering On the Mesa
To preserve baery power, we recommend you power o the
Mesa if it will not be used for two weeks or longer.
CAUTION: Be aware that when the Mesa is powered o, it
closes all programs and powers down all system components
except for the real-time clock. Unlike suspend mode, the device
resets when it is powered on again. Any unsaved data is lost.
1. Save all open les and close any running programs.
2. Press and hold the power buon until the power menu
appears.
3. Tap Power O. A warning dialog appears. Tap OK.
To power on your Mesa, press the power buon.
Restoring the Mesa to its Factory State
Follow the steps below to restore user storage, seings, and
icons on your Mesa to their original factory defaults.
CAUTION: Restoring the Mesa to its original factory state
permanently erases data saved on the Mesa, any soware you
installed, and any changes you made to the Mesa (including
seings changes).
To restore factory defaults (clean boot), press and hold the
rotate + up + return buons simultaneously. The rst
tick mark lights up and the Mesa looks to see if these keys are
being pressed. If so, the backlight dims and the boot process
stalls until all these keys are released. The backlight returns to
normal brightness and the boot process continues.
Communicating with a Desktop Computer
The Mesa can connect to a desktop or laptop computer
allowing you to synchronize information and download
soware and les.
!!
!!
Ch 3 Programs and Settings 37