User's Manual
36 Mesa Rugged Notepad Owner’s Manual
Suspending and Resuming the Mesa
We recommend suspending your Mesa if you plan to turn it
o for less than two weeks. While it is suspended, you should
aach it to a wall charger when not in use.
Suspending the Mesa is dierent from powering it o. When
the device is suspended it goes into a very low power mode.
When it is resumed, the Mesa resumes where it was before it
was suspended.
To suspend your Mesa, press and release the power buon. To
resume the device from suspend mode, press and release the
power buon again.
When the Mesa starts to suspend, the backlight shuts o and
the green LED turns on. It can take several seconds to fully
suspend, especially when the cell modem is on.. The green LED
turns o when suspend is complete. Some baery power is
used during suspend.
Resetting the Mesa
It can be helpful to reset the Mesa when it is unresponsive,
slow, or programs won’t launch. You may be asked to perform
a reset when an application is installed.
CAUTION: Be aware that during a reset, applications are
terminated and unsaved work may be lost.
Follow these steps to reset your Mesa:
1. Save your open les and close any running programs.
2. Press and hold the Power buon until the Power Buon
menu appears.
3. Choose Reset.
You can also reset the Mesa by pressing the power buon for
10 seconds or until the screen goes dark. Aer a few seconds,
the Mesa automatically turns on. This method is useful if your
Mesa locks up.
!!