Owner's Manual

30 Field PC Owner’s Manual
Micro SD Card Installation
A Micro SD card holder is located at the back of the unit. Some
models may ship with a Micro SD card already installed.
CAUTION: Installing a card improperly can result in damage to
the unit not covered by the warranty.
To properly install a Micro SD card complete the following steps:
1. Use a screwdriver to open the back compartment door.
2. Gently li the ap located in the top right corner of the
board protector.
3. Slide the Micro SD card door to the right to open.
4. Slide the Micro SD card into the door with the connectors
facing down and outward.
CAUTION: Do not place the Micro SD card directly into
the board connector. The card reader and the card may be
damaged.
5. Gently shut door and slide it to the le to lock it in place.
!!
!!