Owner's Manual
2. Scroll down and tap on the Screen icon.
3. When the Screen window appears, tap Align Screen.
4. Follow the directions to calibrate the touchscreen.
5. Aer you calibrate the touchscreen, the Screen window
appears again. Tap OK to exit the screen.
Disabling the Touchscreen
To disable or enable the touchscreen, press the BLUE shi key
then the TS key.
PC Card Installation
A PC card can be used to expand the memory and peripheral
capabilities of the Field PC. The PC card slot is also capable
of taking an SD or CF card with an adapter. To install a card
complete the following steps:
1. Use a screwdriver to open the back compartment door.
2. Insert the card socket-rst with the front of the card facing
up. Gently push it in until it stops.
3. Close the door to the card slot and reaach the back
compartment door.
Note: Be careful when inserting and removing cards. Excess force
could damage the card and the card drive.
To remove a card from the slot push the eject buon, grasp the
card rmly and pull it out.
Ch 4 Using the Hardware 29