Owner's Manual

To suspend your device, press the Power buon briey and
release. To resume the device from suspend mode, press the
Power buon again.
Resetting the Device
Follow the steps below to reset the Field PC:
1. Save your open les and close any running programs.
2. Press and hold the Power buon until the Power Buon
menu appears.
3. Choose Reset.
If your device locks up, you can reset the device by pressing
the Power buon for 10 seconds or until the screen goes dark.
Aer a few seconds, the device turns on again.
Restoring the Device to its Factory State
Follow the steps below to restore user storage, seings, and
icons on your Field PC to their original factory defaults.
CAUTION: Restoring the Field PC to its original factory state
permanently erases data saved on the Field PC, any soware
you installed, and any changes you made to the Field PC
(including seing changes).
1. Backup data and soware you want to reinstall on the Field
PC on removable media or a desktop computer.
2. Press and hold the Power buon until the Power Buon
menu appears.
3. Choose Reset and quickly press and hold the Ctrl + Alt
+ Del buons. A progress bar appears. Hold the buons
down until the second tick on the progress bar is shown.
Data and soware stored on removable media (Micro SD or PC
card) is not erased during a clean boot. Soware may need to
be reinstalled on the Field PC aer a clean boot.
!!
Ch 4 Using the Hardware 27