User's Manual

Creating an ActiveSync
®
connection
1. Plug USB Client end (mini B) of the USB communications cable into your Surveyor.
2. Plug the USB Host end (full size A) of the USB communications cable into your desktop
computer.
3. Establish an ActiveSync
®
partnership by following the instructions on the desktop computer
screen.
Installing Windows Mobile
®
Device Center
If your desktop PC has Windows Vista™ complete the following steps:
1. Connect your device to your PC by plugging the USB Client (mini B) into the unit and the
USB Host (full size A) into the desktop.
2. Download the Windows Mobile
®
Device Center Installer to your PC by clicking on the
download link.
3. Select “Run this program from its current location” and click OK.
4. Follow the instructions on the screen.
Creating Windows Mobile Device Center Connection
Once Windows Mobile
®
Device Center has been installed, plug a USB cable into available port
on the computer and the other end into the Surveyor. Windows Mobile
®
Device Center will
automatically open. Follow the steps on the screen.
Note: For more information about connecting to a PC using either ActiveSync
®
or Windows
Mobile
®
Device center visit Microsoft’s Windows
®
Mobile website at http://www.microsoft.com/
windowsmobile/default.mspx.
Specialized keyboard keys
Sticky keys
The Shift, Alt, Ctrl, and 2nd keys are called sticky keys. Each sticky key has three modes, Next
Key, ON, and OFF. The sticky key mode is determined as follows:
By default all sticky keys are OFF.
Pressing the sticky key once toggles the mode only for the next key pressed. For example, with
shift mode OFF (lower case), pressing SHIFT then K displays an upper case K.
Double pressing the sticky key toggles and locks the sticky mode. For example, with the shift
mode OFF, double tapping SHIFT locks the shift mode ON (caps lock). All subsequent non-
sticky keys pressed are then upper case keys. With the shift mode ON, tapping SHIFT turns caps
lock off and all non sticky key presses result in lower case characters.
If you hold down a sticky key it is on for every key stroke until the sticky key is released. The
colored backlights indicate when a sticky key is on.