User's Manual

4. Charge the Surveyor at least 4 hours per battery to get a full charge.
Note: When charging two battery packs in the unit the charge time increases. The bottom battery
will charge first. The left LED light blinks while charging. When the unit is fully charged the
LED will be solid when fully charged. The unit will not be damaged if left connected to the wall
charger for extended periods of time.
Charging temperatures
Only charge your battery pack in temperatures between 32° F and 104° F (0° C and 40° C). For
best results, charge the battery pack at room temperature (68° F or 20° C).
Surveyor Hand strap
To remove the hand strap of the Surveyor press the latch down toward the unit and then slide
down. Either end of the hand strap can be removed.
Anatomy of Surveyor
Pictured below is the available ports on the Surveyor.
USB Client (Mini B)
12 VDC
COM 2
USB Host (Full A)
COM 1