User's Manual

Caution: When not using a battery in the auxiliary slot, using the cover for the auxiliary contacts
is recommended. Failure to do so may cause corrosion on the auxiliary contacts.
4. Insert the tab o
n the top of the battery door into the case slots Close the battery door.
5. Reattach the battery door of the unit.
Charge the battery pack
Before using the Surveyor for the first time it is important to make sure the batteries are
completely charged. Charge the battery/batteries while inside the unit. Complete the following
steps to charge the batteries:
1. Attach the outlet adapter into the wall charger.
2. Plug the wall charger into an outlet.
3. Plug the other end of the wall charger into the DC jack on the Surveyor.