User's Manual

Make the Surveyor discoverable to another device
To allow other devices that use Bluetooth wireless technology to detect the Surveyor and
communicate with it, you must make your device discoverable or establish a partnership with the
other device.
Follow these steps to make your device discoverable:
1. Tap
Start > Settings > Connections tab.
2. Tap Bluetooth.
3. Select the Turn on Bluetooth checkbox, and then select the checkbox to Make this device
discoverable to other devices.
Create a Bluetooth partnership
A partnership is created between the Surveyor and another device that uses Bluetooth wireless
technology to help exchange information securely. Follow the steps below to create a partnership:
1. Make sure the two devices are turned on, discoverable, and within at least 30 feet of one
another.
2. Tap Start > Settings and then tap the Connections tab.
3. Tap Bluetooth > Devices tab > Add New Device. Your device searches for other devices with
Bluetooth capabilities and displays them in the list.
4. The name of the Bluetooth device appears. Tap the name, then tap Next.
5. If the Bluetooth device has an assigned passkey, enter the number. If the device has not
already been assigned a passkey but requires one, enter an alphanumeric passkey on the Surveyor
between 1 and 16 characters. Tap Next.