User's Manual

completely disable the backlight when on battery power, uncheck this checkbox.
Adjusting the backlight timer
By default, the display backlight is set to turn off after one minute of inactivity. To adjust the
time when your backlight turns off, follow these steps:
1. Tap Start > Settings > System > Backlight. The Backlight window appears. To change the
timer for external power, tap the External Power tab.
2. Select or deselect the two options.
3. If you selected the first checkbox, choose the length of time before the backlight turns off.
Bluetooth
®
drivers and profiles
Microsoft
®
Bluetooth drivers are loaded onto your Surveyor at the factory. These drivers support
the following profiles: serial port, file transfer, audio/visual control, dial up networking, object push,
human interface device, and advanced audio distribution.
Identify the power status of Bluetooth using Wireless Manager
To determine the power status of the Bluetooth tap Start > Settings > Connections tab >
Bluetooth > Mode tab.
Note: By default, Bluetooth is turned off. If you turn Bluetooth on and then suspend the device,
Bluetooth turns off while the Surveyor is suspended to save battery power. When you resume
(turn on) the Surveyor, Bluetooth turns on automatically.