Terms and Conditions
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- About This Topic Collection
- Part 1: Access Point Overview and Components
- Part 2: Planning for Access Point Installation
- Part 3: Safety Guidelines and Standards for Access Point Installation
- Part 4: Requirements and Certifications
- Part 5: Installing, Connecting, and Verifying the Access Point
- Chapter 7: Installing and Connecting the Access Point
- Installation Instructions Warning
- Unpacking a WLA532E Access Point
- Parts Inventory (Packing List) for a WLA532E Access Point
- Installing the WLA532E Access Point on a Ceiling Rail
- Installing the WLA532E Access Point Using the Plenum Bracket Kit
- Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy Mounting Bracket Adapter Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-BRKT-WALL Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-NA Wall-Mount Kit
- Connecting the Access Point to Wireless LAN Controllers
- Chapter 8: Verifying the Health of the Access Point
- Chapter 9: Customer Support
- Chapter 7: Installing and Connecting the Access Point
Figure 23: Rotating the Locking Bracket into a Locked Position
8. Check that the locking bracket tabs are locked into the WLA522 mounting bracket
(see Figure 24 on page 60). The legacy mounting bracket adapter should now be
locked onto the ceiling.
Figure 24: Locked Bracket Tabs on the WLA522 Mounting Bracket
9. Ensure that the snaps on the top of the ceiling-mount bracket are open so that the
clips can fully extend to fit onto the legacy mounting bracket adapter. The
ceiling-mount bracket is shipped in an open position so that it is ready to be clipped
over a ceiling rail. If the bracket is closed, open the snaps by pressing in and up with
your thumbs on both sides of the snaps on the bottom of the bracket (see Figure 25
on page 61) until it is fully open.
Copyright © 2012, Juniper Networks, Inc.60
WLA532E Access Point Hardware Documentation