Terms and Conditions
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- About This Topic Collection
- Part 1: Access Point Overview and Components
- Part 2: Planning for Access Point Installation
- Part 3: Safety Guidelines and Standards for Access Point Installation
- Part 4: Requirements and Certifications
- Part 5: Installing, Connecting, and Verifying the Access Point
- Chapter 7: Installing and Connecting the Access Point
- Installation Instructions Warning
- Unpacking a WLA532E Access Point
- Parts Inventory (Packing List) for a WLA532E Access Point
- Installing the WLA532E Access Point on a Ceiling Rail
- Installing the WLA532E Access Point Using the Plenum Bracket Kit
- Installing the WLA532E Access Point on a Ceiling Rail Using the Trapeze Legacy Mounting Bracket Adapter Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-BRKT-WALL Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-EU Wall-Mount Kit
- Installing the WLA532E Access Point on the Wall Using the WLA-GNGWLBX-ADP-NA Wall-Mount Kit
- Connecting the Access Point to Wireless LAN Controllers
- Chapter 8: Verifying the Health of the Access Point
- Chapter 9: Customer Support
- Chapter 7: Installing and Connecting the Access Point
• Requirements and Specifications for 2.4-GHz Radios on a WLA532E Access Point on
page 31
• Requirements and Specifications for 5-GHz Radios on a WLA532E Access Point on
page 32
External Antenna Configurations for the WLA532E Access Point
The Juniper Networks Wireless LAN Access Point WLA532E supports 3 external antennas
with a maximum gain of 11dBi at 2.4GHz and 25.5dBi at 5GHz.
The labeled ports enable single band connection operations such as distributed antenna
system (DAP) and AP plus mesh applications with combinations. See Table 3 on page 8
and Table 4 on page 8 for antenna configurations.
Table 3: Single Band Antenna Configurations for 2.4GHz and 5GHz Radios
3x3 only2x2 only1x1 and 2x2 combo1x1 only
Port 1+2+3 for either 2.4GHz
or 5GHz but not both
Ports 1 and 2 for 5GHz OR
Ports 2 and 3 for 2.4GHz
Port 2 for 5GHz + Ports 1 and 3 for
2.4GHz OR Port 3 for 2.4GHz + Ports 1
and 2 for 5GHz
Port 2 for 5GHz and/or
Port 3 for 2.4GHz
Table 4: Dual Band Antenna Configurations for 2.4GHz and 5GHz Radios
3x32x21x1
Port 1+2+3 for both 2.4GHz or 5GHzPorts 1 and 2 for 5GHz and/or Ports 2 and 3
for 2.4GHz
Port 2 for 5GHz and/or Port 3 for
2.4GHz
Related
Documentation
WLA532E Antenna Models on page 7•
• Requirements and Specifications for 2.4-GHz Radios on a WLA532E Access Point on
page 31
• Requirements and Specifications for 5-GHz Radios on a WLA532E Access Point on
page 32
Status LEDs on a WLA532E Access Point
The Juniper Networks Wireless LAN Access Point WLA532E has three status LEDs that
glow in green, red and amber colors to indicate the status of the access point, see Table
5 on page 9.
Copyright © 2012, Juniper Networks, Inc.8
WLA532E Access Point Hardware Documentation