User Manual
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- Part 1: Overview
- Part 2: Planning
- Part 3: Safety
- Part 4: Installation
- Part 5: Troubleshooting
- Part 6: Index
CHAPTER 1
Access Point Overview
•
WLA532 AccessPoint Hardware Overview on page 3
•
MAC Address Information for WLA Series Access Points on page 4
WLA532 AccessPoint Hardware Overview
Juniper Networks Enterprise wireless LAN Indoor Access Point, WLA532, is based on the
next evolution of 802.11n technology based radio chipsets. WLA 532 is a dual radio 3X3
multiple input, multiple output (MIMO) access point supporting up to three spatial
streams on each radio. WLA532 is a compact hexagon shaped access point and is targeted
at enterprise customers including verticals such as Healthcare, Education and other
carpeted offices.
Figure 1: WLA532 Access Point
NOTE: The WLA532 requires only hardware installation. All configurations
for the access point is done on the wireless LAN controllers.
The WLA532 access point supports:
•
In band spectrum monitoring and network spectrum mitigation
•
Minimum 450Mbps or 500 Mbps (? to be clarified during review) to wire from two
radios at large packets
•
One 2.4GHz 3x3 802.11n standard power radio subsystem
3Copyright © 2011, Juniper Networks, Inc.