User Manual
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- Part 1: Overview
- Part 2: Planning
- Part 3: Safety
- Part 4: Installation
- Part 5: Troubleshooting
- Part 6: Index
4. If the access point is not properly secured, press the release button on the bottom of
the bracket to release the device. Realign the unit, making sure the cable is still
connected and push down until the access point clicks securely into place.
NOTE: We recommend that you use the optional security kit (separately
orderable) to secure the access point. The kit includes a special tool and
a security screw. Be sure that you retain the tool so that you can unlock
and move the access point. Never use a power tool to insert or remove
the security screw.
5. To lock the WLA into place, secure the security screw in through the release button
by using the tool provided with the security kit (do not overtighten the screw).
Copyright © 2011, Juniper Networks, Inc.38
WLA 532 Access Point Hardware Documentation