User Manual
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- Part 1: Overview
- Part 2: Planning
- Part 3: Safety
- Part 4: Installation
- Part 5: Troubleshooting
- Part 6: Index
7. Plug in the Category 5 cable that extends from the ceiling into the WLA.
8. Align the WLA with the bracket and press forward until the WLA clicks into place. Be
sure the WLA is seated correctly in the bracket by gently pulling down on the WLA.
9. If the WLA is not properly secured, press in on the release button on the top of the
bracket to unlock the WLA. Realign the access point, making sure the cable is still
connected, and push in until the WLA clicks securely into place.
35Copyright © 2011, Juniper Networks, Inc.
Installing the Access Point