User Manual

Table 3: Mechanical and Compliance Specification for WLA532 (continued)
DescriptionSpecification
Power-save mode supported
Transmit power control in 1 dBm increments
Supports up to 250 clients per radio
Supports Dynamic Frequency Selection
General
Radio Specifications
The mechanical and compliance specifications for WLA532 access point is listed in the
table.
Table 4: Radio Specification for WLA532
DescriptionSpecification
Integrated diversity omnidirectional
Internal 3X3 Multiple Input Multiple Output(MIMO)
Antenna type
Internal: 2-3 dBi (2.4 GHz)
Internal: 4-5 dBi (5 GHz)
Antenna gain
2.4 GHz to 5 GHz based on country regulationsFrequency band
Based on the country of operation specified by the system administratorOperating channels
802.11n rates: MCS 0 to MCS 23Association rates
Orthogonal frequency division multiplexing (OFDM)Modulation
18 dBm transmit power per chain (200mW combined 3-stream output power) and
-90dBm receive sensitivity at MCS0 data rate
12 dBm transmit power per chain (50mW combined 3-stream output power) and
-70dBm receive sensitivity at MCS23 data rate.
Transmit power
17Copyright © 2011, Juniper Networks, Inc.
Planning Guidelines