User Manual

•
Single auto-sensing 10/100/1000 Ethernet port, configured as MDI
•
Comply with IEEE 802.3, 802.3u and 802.3ab standards
•
PowerDsine(Microsemi) GigE PoE injector support
•
802.3af PoE compatability
Ceiling and Wall Mounting
The WLA 532 access point can be mounted to a recessed 15/16” ceiling tile rail without
disrupting rail or tile alignment. The WLA532 access point hardware will be provided with
the following mounting adapters provided in an auxiliary mounting kit:
•
9/16” recessed ceiling tile rail adapter
•
Center tile mount adapter and wall mount adapter
•
Trapeze legacy mounting bracket adapter (Reviewers, is this required?)
•
North America single gang wall box adapter (minimum extension from wall, covers
wall box and cables)
•
European Union single gang wall box adapter
Mechanical and Compliance Specifications
The mechanical and compliance specifications for WLA532 access point is listed in the
table
Table 3: Mechanical and Compliance Specification for WLA532
DescriptionSpecification
Length: 14 centimeters (5.5 inches)
Width: 13.15 centimeters (5.1 inches)
Height: 5.3 centimeters (2 inches)
Size
Without mounting bracket: 264 grams (9.31 ounces)Weight
0° C to 50° C (32° F to +122° F)Operating Temperature
-40° C to +70° C (-40° F to +158° F)Storage Temperature
5% to 95% non-condensingHumidity
? years ? (Reviewers, please confirmMTBF
Directive 2002/95/EC, 2006/122/EC China RoHS (?0RoHs/ IEEE
40 V to 54 V
IEEE 802.3af
Power over Ethernet (PoE)
15Copyright © 2011, Juniper Networks, Inc.
Planning Guidelines