User Manual
Table Of Contents
- Table of Contents
- List of Figures
- List of Tables
- Part 1: Overview
- Part 2: Planning
- Part 3: Safety
- Part 4: Installation
- Part 5: Troubleshooting
- Part 6: Index
Table 2: Status LEDs on WLA532 Access Points (continued)
Status and DescriptionColorLabel
Off. The 5 GHz radio is disabled.LED on
the right
(11 AN)
On. The 5 GHz radio is enabled.Green
On. Dedicated sensorAmber
On. The access point is transmitting and receiving on the 5 GHz radio.Green or amber, flashing
On. The radio has failed.Red
Off. The 2.4 GHz radio is disabled.LED on
the left
(11
BGN)
On. The 2.4 GHz radio is enabled.Green
On. Dedicated sensorAmber
On. The access point is transmitting and receiving on the 2.4GHz radio.Flash Green or Amber
On. The radio has failed.Red
Related
Documentation
• Ethernet Connections for WLA532 Access Points on page 7
• Radio Requirements for 2.4GHz on page 19
• Radio Requirements for 5GHz on page 19
9Copyright © 2011, Juniper Networks, Inc.
Ports and Connectors
Please clarify what is dedicated sensor