Computer Hardware User Manual

SSG 20 Hardware Installation and Configuration Guide

78 

9. V.92 Modem Interface Window

If you have the V.92 mini-PIM installed in your device, you can configure the

serialx/0 (Modem) interface using the following window:

Figure 38: Modem Interface Window

Table 23: Fields in Modem Interface Window

10. Eth0/0 Interface (Untrust Zone) Window

The eth0/0 interface can have a static or a dynamic IP address assigned via DHCP

or PPPoE.

Dialer Pool (Dialer only) Sets the dialer pool name for the dialer interface.

Netmask Sets the netmask.

Gateway Sets the gateway address.

Field Description

Modem Name Sets the name for the modem interface

Init String Sets the initialization string for the modem

ISP Name Assigns a name to the service provider

Primary Number Specifies the phone number to access the service provider

Alternative Number (optional) Specifies an alternative phone number to access the service

provider if the primary number does not connect

Password Sets the password for the login name

Confirm Confirms the password typed in the Password field

Field Description