User manual
Table Of Contents
- Adaptive Services II PIC
- Adaptive Services II FIPS PIC
- ATM2 DS3 IQ PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PIC
- Channelized DS3 IQ PIC
- Channelized E1 IQ PIC
- Channelized OC12 PIC
- Channelized OC12 IQ PIC
- Channelized OC3 IQ PIC
- Channelized STM1 IQ PIC
- Channelized T1 IQ PIC
- DS3 PIC
- E1 PIC
- E3 PIC
- E3 IQ PIC
- EIA-530 PIC
- ES PIC
- Fast Ethernet PICs
- Gigabit Ethernet PIC with SFP
- Gigabit Ethernet IQ PIC with SFP
- Gigabit Ethernet IQ2 PIC with SFP
- Link Services PIC
- MultiServices 100 PIC
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3c/STM1 PIC with SFP
- SONET/SDH OC3/STM1 (Multi-Rate) PIC with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PIC with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- T1 PIC
- Tunnel Services PIC
- High Availability Features

Status LED, one tricolor:
■
Off—PIC is offline and it is safe to remove it from the chassis.
■
Green—PIC is operating normally.
■
Amber—PIC is initializing.
■
Red—PIC has an error or failure and no further harm can be done by removing it from
the chassis.
Application LED, one tricolor:
■
Off—Service is not running.
■
Green—Service is running under acceptable load.
■
Amber—Service is overloaded.
LEDs
8 ■ Adaptive Services II FIPS PIC
M10i Internet Router PIC Guide