User manual
Table Of Contents
- Adaptive Services II PIC
- Adaptive Services II FIPS PIC
- ATM2 DS3 IQ PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PIC
- Channelized DS3 IQ PIC
- Channelized E1 IQ PIC
- Channelized OC12 PIC
- Channelized OC12 IQ PIC
- Channelized OC3 IQ PIC
- Channelized STM1 IQ PIC
- Channelized T1 IQ PIC
- DS3 PIC
- E1 PIC
- E3 PIC
- E3 IQ PIC
- EIA-530 PIC
- ES PIC
- Fast Ethernet PICs
- Gigabit Ethernet PIC with SFP
- Gigabit Ethernet IQ PIC with SFP
- Gigabit Ethernet IQ2 PIC with SFP
- Link Services PIC
- MultiServices 100 PIC
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3c/STM1 PIC with SFP
- SONET/SDH OC3/STM1 (Multi-Rate) PIC with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PIC with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- T1 PIC
- Tunnel Services PIC
- High Availability Features
Tunnel Services PIC
■
JUNOS 6.1 and laterSoftware release
■
Power requirement: 0.07 A @ 48 V (3.4 W)Description
■
Loopback function that encapsulates and de-encapsulates packets
■
SONET/SDH OC12/STM4 tunneling bandwidth
Hardware features
For a list of the software features available for services PICs, see the JUNOS Services Interfaces
Configuration Guide.
■
IP-IP unicast tunneling
■
GRE unicast tunneling
■
PIM sparse mode unicast tunneling
Software features
One tricolor:
■
Off—Not enabled
■
Green—Online with no alarms or failures
■
Amber—Online with alarms for remote failures
■
Red—Active with a local alarm; router has detected a failure
LEDs
76 ■ Tunnel Services PIC
M10i Internet Router PIC Guide