User manual
Table Of Contents
- Adaptive Services II PIC
- Adaptive Services II FIPS PIC
- ATM2 DS3 IQ PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PIC
- Channelized DS3 IQ PIC
- Channelized E1 IQ PIC
- Channelized OC12 PIC
- Channelized OC12 IQ PIC
- Channelized OC3 IQ PIC
- Channelized STM1 IQ PIC
- Channelized T1 IQ PIC
- DS3 PIC
- E1 PIC
- E3 PIC
- E3 IQ PIC
- EIA-530 PIC
- ES PIC
- Fast Ethernet PICs
- Gigabit Ethernet PIC with SFP
- Gigabit Ethernet IQ PIC with SFP
- Gigabit Ethernet IQ2 PIC with SFP
- Link Services PIC
- MultiServices 100 PIC
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3c/STM1 PIC with SFP
- SONET/SDH OC3/STM1 (Multi-Rate) PIC with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PIC with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- T1 PIC
- Tunnel Services PIC
- High Availability Features
Table 12: MultiServices PICs Software Features Supported by the M10i Router (continued)
8.1Stateful firewall with packet inspection: detects SYN attacks, ICMP and UDP floods, and
ping of death attacks
8.1Network Address Translation (NAT) for IP addresses
8.1Port Address Translation (PAT) for port numbers
8.1IP Security (IPSec) encryption
8.1Active flow monitoring exports cflowd version 5 and version 8 records
8.3Active flow monitoring exports flow monitoring version 9 records, based on RFC 3954
–Passive flow monitoring
–Passive flow collection
8.2Flow-tap
–Dynamic flow capture
8.2Real-time performance monitoring
8.1Link services
8.1Tunnel services:
■
IP-IP unicast tunneling
■
GRE unicast tunneling—Supports GRE fragmentation
■
Protocol Independent Multicast (PIM) sparse mode unicast tunneling
8.1Virtual tunnel interface for Layer 3 VPNs
8.1Layer 2 Tunneling Protocol (L2TP)
8.1Voice services:
■
Compressed Real-Time Transport Protocol (CRTP)
8.1Encapsulations:
■
Multilink Frame Relay (MLFR)
■
Multilink Point-to-Point Protocol (MLPP)
56 ■ MultiServices 100 PIC
M10i Internet Router PIC Guide