User manual

E3 IQ PIC
■
JUNOS 6.1 and laterSoftware release
■
Four E3 ports
■
Power requirement: 0.38 A @ 48 V (18 W)
■
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface
Description
■
Clear-channel (34.368-Mbps) and subrate E3
■
Unframed or ITU G.751 framing
■
Data service unit (DSU) functionality
■
Subrate and scrambling:
■
Digital Link/Quick Eagle
■
Kentrox
■
HDB3 line encoding
■
Full bit error rate test (BERT)
■
Local and remote loopback testing
Hardware features
■
Quality of service (QoS) per port: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
■
Simple Network Management Protocol (SNMP): E3 MIB, QoS MIB
■
Input policing and output shaping
■
Provider-side rate limiting
■
Full data link connection identifier (DLCI) range with sparse channel numbering
■
Per-DLCI queues with weighted deficit round-robin and strict priority
■
Encapsulations:
■
High-Level Data Link Control (HDLC)
■
Frame Relay
■
Circuit cross-connect (CCC)
■
Translational cross-connect (TCC)
■
Point-to-Point Protocol (PPP)
■
JUNOS Release 7.0 or later is required to configure graceful Routing Engine switchover
(GRES).
Software features
■
Standard E3 BNC coaxial cable interfacesCables and connectors
38 ■ E3 IQ PIC
M10i Internet Router PIC Guide