User manual

Channelized OC12 IQ PIC
■
JUNOS 6.1 and laterSoftware release
■
One OC12 port
■
Power requirement: 0.23 A @ 48 V (10.8 W)
■
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface
■
Channelization: OC3, DS3, DS1, DS0
Description
■
Subrate and scrambling:
■
Digital Link/Quick Eagle
■
Kentrox
■
Larscom
■
ADTRAN
■
Verilink
■
Packet buffering, Layer 2 parsing
■
M13/C-bit parity encoding
■
DS3 far-end alarm and control (FEAC) channel support
■
Local and remote loopback testing
Hardware features
■
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
■
Simple Network Management Protocol (SNMP): OC3 MIB, DS3 MIB, T1 MIB
■
Dynamic, arbitrary channel configuration
■
Full bit error rate test (BERT)
■
Encapsulations:
■
High-Level Data Link Control (HDLC)
■
Frame Relay
■
Circuit cross-connect (CCC)
■
Translational cross-connect (TCC)
■
Point-to-Point Protocol (PPP)
Software features
■
Duplex SC/PC connector (Rx and Tx); single-mode fiber
■
Optical interface support—See Table 6 on page 25
Cables and connectors
24 ■ Channelized OC12 IQ PIC
M10i Internet Router PIC Guide