User manual
Table Of Contents
- Adaptive Services II PIC
- Adaptive Services II FIPS PIC
- ATM2 DS3 IQ PIC
- ATM2 E3 IQ PIC
- ATM2 OC3/STM1 IQ PIC
- ATM2 OC12/STM4 IQ PIC
- Channelized DS3 IQ PIC
- Channelized E1 IQ PIC
- Channelized OC12 PIC
- Channelized OC12 IQ PIC
- Channelized OC3 IQ PIC
- Channelized STM1 IQ PIC
- Channelized T1 IQ PIC
- DS3 PIC
- E1 PIC
- E3 PIC
- E3 IQ PIC
- EIA-530 PIC
- ES PIC
- Fast Ethernet PICs
- Gigabit Ethernet PIC with SFP
- Gigabit Ethernet IQ PIC with SFP
- Gigabit Ethernet IQ2 PIC with SFP
- Link Services PIC
- MultiServices 100 PIC
- SONET/SDH OC3c/STM1 PIC
- SONET/SDH OC3c/STM1 PIC with SFP
- SONET/SDH OC3/STM1 (Multi-Rate) PIC with SFP
- SONET/SDH OC12c/STM4 PIC
- SONET/SDH OC12/STM4 (Multi-Rate) PIC with SFP
- SONET/SDH OC48c/STM16 PIC with SFP
- T1 PIC
- Tunnel Services PIC
- High Availability Features

Channelized DS3 IQ PIC
■
JUNOS 6.1 and laterSoftware release
■
Four DS3 ports
■
Power requirement: 0.32 A @ 48 V (15.6 W)
■
Intelligent queuing (IQ) PICs support fine-grained queuing per logical interface
■
Channelization: DS3, DS0
Description
■
Data service unit (DSU) functionality
■
Subrate and scrambling:
■
Digital Link/Quick Eagle
■
Kentrox
■
Larscom
■
ADTRAN
■
Verilink
■
B3ZS line encoding
■
M13 or C-bit parity
■
Full bit error rate test (BERT)
■
Local and remote loopback testing
Hardware features
■
Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection
(RED), weighted random early detection (WRED)
■
Simple Network Management Protocol (SNMP): DS1 MIB, DS3 MIB
■
Dynamic, arbitrary channel configuration
■
Encapsulations:
■
High-Level Data Link Control (HDLC)
■
Frame Relay
■
Circuit cross-connect (CCC)
■
Translational cross-connect (TCC)
■
Point-to-Point Protocol (PPP)
Software features
■
Standard DS3 BNC coaxial cable interfacesCables and connectors
18 ■ Channelized DS3 IQ PIC
M10i Internet Router PIC Guide