Installation Guide
Table Of Contents
Figure 6: Attaching the Antennas Using an Antenna Base (Wall Mounting)
g022548
(27.9 cm)
> 11 in.
9. Power on the services gateway.
Related
Documentation
Configuring the WAP Mini-PIM
•
Access Point Configuration Overview on page 28
•
Radio Configuration Overview on page 29
•
Virtual Access Point Configuration Overview on page 30
•
Configuring the WAP Mini-PIM on page 31
Access Point Configuration Overview
Before proceeding with the configuration, configure the network settings on the SRX
Series device and connect the deviceto your network. For details, see the Hardware Guide
for your SRX Series device.
Copyright © 2019, Juniper Networks, Inc.28
Wireless Access Point (WAP) Mini-PIM Installation Guide