Installation Guide

Table 7: Specifications for the WAP Mini-PIM Antenna (continued)
ValueSpecification
LinearPolarization
–4° F (–20° C) to 149° F (65° C)Operating temperature
RP-SMAConnector type
Channels and Frequencies Supported on the WAP Mini-PIM
The WAP mini-PIM supports channel bandwidths of 20 MHz, 40 MHz, and 80 MHz. You
can configure the bandwidth by using the command set wlan access-point ap-name radio
[1|2] radio-option channel bandwidth bandwidth
NOTE: You can configure the 80 MHz channel bandwidth only on the 5 GHz
radio.
The default channel bandwidth is 20 MHz. Setting the bandwidth to 40 MHz or 80 MHz
reduces the number of available channels for use.
Table 8 on page 20 and Table 9 on page 20 list the channels supported on the 2.4 GHz
radio.
19Copyright © 2019, Juniper Networks, Inc.
Chapter 1: WAP Mini-Physical Interface Module (Mini-PIM)