- Juniper Router Hardware Guide
Replace Routing E
ngine Components
2. When the PC card pops partially out of the slot, grasp the card and pull it straight
outoftheslot.
Figure 40: Remove the PC Card
1332
Eject button
Insert the PC Card
ToinsertthePCcard,followthisprocedure(seeFigure41):
1. Orient th
e PC card with the Juniper Networks logo facing in the direction specified on
the Routing Engine faceplate. Insert the card into the slot.
2. Press the card firmly all the way into the slot. Note that the PC card slot might be
located in a different position from that shown in Figure 41.
11 4 M5 and M10 Internet Routers Hardware Guide